ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 59)

100

101

Command Reference Guide Enable Mode Command Set

debug ip udp

Use the debug ip udp command to activate debug messages associated with UDP send and receive events

in the ADTRAN OS. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the

no form of this command to disable the debug messages.

These debug events are logged for packets that are sent or received from the router.

Forwarded UDP packets are not included.

The overhead associated with this command takes up a large portion of your router’s

resources and at times can halt other router processes. It is best to only use the command

during times when the network resources are in low demand (non-peak hours, weekends,

etc.).

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the ADTRAN OS are disabled.

Command Modes

# Enable Command Mode

Command History

Release 4.1 Command was introduced

Functional Notes

In the

debug ip udp

information, the message

no listener

means that there is no service listening on this UDP

port (i.e., the data is discarded).

Usage Examples

The following is sample output for this command:

enable

debug ip udp

2003.02.17 07:38:48 IP.UDP RX: src=10.200.3.236:138, dst=10.200.255.255:138, 229 bytes , no listener

2003.02.17 07:38:48 IP.UDP RX: src=10.200.2.7:138, dst=10.200.255.255:138, 227 bytes , no listener

2003.02.17 07:38:48 IP.UDP RX: src=10.200.201.240:138, dst=10.200.255.255:138, 215 bytes , no

listener

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 59

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing