ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 350)

100

101

DSX-1 Interface Configuration Command Set Command Reference Guide

coding [ ami | b8zs ]

Use the coding command to configure the line coding for a T1 or DSX-1 physical interface. This setting

must match the line coding supplied on the circuit by the PBX.

Syntax Description

ami

Configures the line coding for alternate mark inversion.

b8zs

Configures the line coding for bipolar eight zero substitution.

Default Values

By default, all T1 interfaces are configured with B8ZS line coding.

Command Modes

(config-t1 1/1)# T1 or DSX-1 Interface Configuration Mode required.

(config-t1 1/2)#

Command History

Release 1.1 Command was introduced

Functional Notes

The line coding configured in the unit must match the line coding of the T1 circuit. A mismatch will result in line

errors (e.g., BPVs).

Usage Examples

The following example configures the DSX-1 interface for AMI line coding:

(config)#

interface t1 1/2

(config-t1 1/2)#

coding ami

1 2 ... 345 346 347 348 349 350 351 352 353 354 355 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 350

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing