ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 381)

100

101

Command Reference Guide SHDSL Interface Configuration Command Set

test-pattern

Use the test-pattern command to activate the built-in pattern generator and begin sending the 2^15 test

pattern toward the network. This pattern generation can be used to verify a data path when used in

conjunction with an active loopback. Use the no form of this command to cease pattern generation.

Syntax Description

2^15

Sends a 2^15 test pattern toward the network.

clear

Clears the test pattern results on the SHDSL interface.

insert

Inserts an error into the generated test pattern being transmitted on the SHDSL

interface. The injected error result is displayed using the

test-pattern show

command.

show

Displays the results of the test pattern.

Default Values

No defaults necessary for this command.

Command Modes

(config-shdsl 1/1)# SHDSL Interface Configuration Mode required.

Command History

Release 3.1 Command was introduced

Usage Examples

The following example sends a 2^15 test pattern:

(config)#

interface shdsl 1/1

(config-shdsl 1/1)#

test-pattern 2^15

1 2 ... 376 377 378 379 380 381 382 383 384 385 386 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 381

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing