ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 397)

100

101

Command Reference Guide BRI Interface Configuration Command Set

isdn switch-type <type>

Use the isdn switch-type command to specify the ISDN signaling type configured on the Basic Rate ISDN

(BRI) interface. The type of ISDN signaling implemented on the BRI interface does not always match the

manufacturer of the Central Office Switch. Use the no form of this command to return to the default value.

Syntax Description

<type>

Specifies the signaling type on the BRI interface (configured by the service

provider on the Central Office Switch)

basic-5ess

Specifies Lucent/AT&T 5ESS signaling on the BRI interface

basic-dms

Specifies Nortel DMS-100 custom signaling on the BRI interface

The

basic-dms

signaling type is not compatible with proprietary SL-1 DMS

signaling.

basic-ni

Specifies National ISDN-1 signaling on the BRI interface

Default Values

<type> basic-ni

Command Modes

(config-bri 1/2)# BRI Interface Configuration Mode required

Command History

Release 1.1 Command was introduced

Functional Notes

The

isdn

switch-type

command specifies the type of ISDN signaling implemented on the BRI interface, not

the manufacturer of the Central Office Switch. It is quite possible to have a Lucent Central Office Switch

providing National ISDN signaling on the BRI interface.

Usage Examples

The following example configures a BRI interface for a circuit with Lucent 5ESS (custom) signaling:

(config)#

interface bri 1/2

(config-bri 1/2)#

isdn switch-type basic-5ess

1 2 ... 392 393 394 395 396 397 398 399 400 401 402 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 397

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing