ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 342)

100

101

T1 Interface Configuration Command Set Command Reference Guide

loopback remote payload

Use the loopback remote payload command to send a loopback code to the remote unit to initiate a

payload loopback. A payload loopback is a 1.536 Mbps loopback of the payload data received from the

network maintaining bit-sequence integrity for the information bits by synchronizing (regenerating) the

timing. Use the no form of this command to send a loopdown code to the remote unit to deactivate the

loopback.

Syntax Description

No subcommands

Default Values

No defaults necessary for this command.

Command Modes

(config-t1 1/1)# T1 or DSX-1 Interface Configuration Mode required.

(config-t1 1/2)#

Command History

Release 1.1 Command was introduced

Functional Notes

The following diagram depicts the difference between a line and payload loopback.

Usage Examples

The following example initiates a remote payload loopback:

(config)#

interface t1 1/1

(config-t1 1/1)#

loopback remote payload

T1 Network Interface

DS1

NI CSU

Payload Loopback

Line Loopback

1 2 ... 337 338 339 340 341 342 343 344 345 346 347 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 342

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing