ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 227)

100

101

Command Reference Guide Global Configuration Mode Command Set

router ospf

Use the router ospf command to activate OSPF in the router and to enter the OSPF Configuration Mode.

See the section Router (OSPF) Configuration Command Set on page 541 for more information. Use the no

form of this command to disable OSPF routing.

Syntax Description

No subcommands.

Default Values

By default, OSPF is disabled.

Command Modes

(config)# Global Configuration Mode required

Command History

Release 3.1 Command was introduced

Functional Notes

The AOS can be configured to use OSPF with the firewall enabled (using the

ip firewall

command). To do

this, configure the OSPF networks as usual, specifying which networks the system will listen for and broadcast

OSPF packets to. See

ip firewall

on page 190 for more information.

To apply stateful inspection to packets coming into the system, create a policy-class that describes the type of

action desired and then associate that policy-class to the particular interface (see

ip policy-class

<policyname> max-sessions

on page 208). The firewall is intelligent and will only allow OSPF packets that

were received on an OSPF configured interface. No modification to the policy-class is required to allow OSPF

packets into the system.

Usage Examples

The following example uses the

router ospf

command to enter the OSPF Configuration Mode:

(config)#

router ospf

(config-ospf)#

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 227

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing