ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 325)

100

101

Command Reference Guide Ethernet Interface Configuration Command Set

speed <rate>

Use the speed command to configure the speed of an Ethernet interface. Use the no form of this command

to return to the default value.

Syntax Description

<rate>

Defines the rate of the Ethernet port

10 Mb Ethernet

100

100 Mb Ethernet

auto

*Optional

Automatically detects 10 or 100 Mb Ethernet and negotiates the duplex

setting

If the speed is manually set to 10 or 100, the duplex must be manually configured as

full-duplex or half-duplex.

Default Values

<rate> auto

Command Modes

(config-eth 0/1)# Ethernet Interface Configuration Mode required

Command History

Release 1.1 Command was introduced

Usage Examples

The following example configures the Ethernet port for 100 Mb operation:

(config)#

interface ethernet 0/1

(config-eth 0/1)#

speed 100

1 2 ... 320 321 322 323 324 325 326 327 328 329 330 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 325

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing