ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 356)

100

101

DSX-1 Interface Configuration Command Set Command Reference Guide

signaling-mode [ message-oriented | none | robbed-bit ]

Use the signaling-mode command to configure the signaling type (robbed-bit for voice or clear channel

for data) for the DS0s mapped to the DSX-1 port.

Syntax Description

message-oriented

Clear channel signaling on Channel 24 only. Use this signaling type with QSIG

installations.

none

Clear channel signaling on all 24 DS0s. Use this signaling type with data-only or

PRI DSX-1 installations.

robbed-bit

Robbed bit signaling on all DS0s. Use this signaling type for voice-only DSX-1

applications.

Default Values

By default, the signaling mode is set to robbed-bit.

Command Modes

(config-t1 1/2)# DSX-1 Interface Configuration Mode required

Command History

Release 1.1 Command was introduced

Usage Examples

The following example configures the DSX-1 port for PRI compatibility:

(config)#

interface t1 1/2

(config-t1 1/2)#

signaling-mode none

1 2 ... 351 352 353 354 355 356 357 358 359 360 361 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 356

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing