ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 358)

100

101

DSX-1 Interface Configuration Command Set Command Reference Guide

snmp trap link-status

Use the snmp trap link-status to control the SNMP variable ifLinkUpDownTrapEnable (RFC 2863) to

enable (or disable) the interface to send SNMP traps when there is an interface status change. Use the no

form of this command to disable this trap.

Syntax Description

No subcommands

Default Values

By default, the ifLinkUpDownTrapEnable OID is set to enabled for all interfaces except virtual frame relay

interfaces.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), T1 (t1 1/1), DSX-1 (t1 1/2), serial

(ser 1/1), DDS (dds 1/1), virtual frame relay (fr 1), virtual PPP (ppp 1), and

SHDSL (shdsl 1/1) interfaces.

Command History

Release 1.1 Command was introduced

Functional Notes

The

snmp trap link-status

command is used to control the RFC 2863 ifLinkUpDownTrapEnable OID (OID

number 1.3.6.1.2.1.31.1.1.1.14.0).

Usage Examples

The following example disables the link-status trap on the DSX-1 interface:

(config)#

interface t1 1/2

(config-t1 1/2)#

no snmp trap link-status

1 2 ... 353 354 355 356 357 358 359 360 361 362 363 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 358

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing