ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 411)

100

101

Command Reference Guide Frame Relay Interface Config Command Set

snmp trap link-status

Use the snmp trap link-status command to control the SNMP variable ifLinkUpDownTrapEnable (RFC

2863), which enables (or disables) the interface to send SNMP traps when there is an interface status

change. Use the no form of this command to disable this trap.

Syntax Description

No subcommands

Default Values

By default, the ifLinkUpDownTrapEnable OID is set to enabled for all interfaces except virtual frame relay

interfaces.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), T1 (t1 1/1), DSX-1 (t1 1/2), serial

(ser 1/1), DDS (dds 1/1), virtual frame relay (fr 1), virtual PPP (ppp 1), and SHDSL

(shdsl 1/1).

Command History

Release 1.1 Command was introduced

Functional Notes

The

snmp trap link-status

command is used to control the RFC 2863 ifLinkUpDownTrapEnable OID (OID

number 1.3.6.1.2.1.31.1.1.1.14.0).

Usage Examples

The following example disables the link-status trap on the frame relay interface:

(config)#

interface frame-relay 1

(config-fr 1)#

no snmp trap link-status

1 2 ... 406 407 408 409 410 411 412 413 414 415 416 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 411

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing