ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 404)

100

101

Frame Relay Interface Config Command Set Command Reference Guide

frame-relay lmi-n392dte <threshold>

Use the frame-relay lmi-n392dte command to set the N392 error threshold for the DTE endpoint. Typical

applications should leave the default value for this setting. Use the no form of this command to return to

the default value.

Syntax Description

Sets the threshold value (valid range: 1-10)

Default Values

<threshold> 3 errors

Command Modes

(config-fr 1)# Virtual Frame Relay Interface Configuration Mode required

Command History

Release 1.1 Command was introduced

Functional Notes

If the error threshold is met, the signaling state status is changed to down, which indicates a service-affecting

condition. This condition is cleared once N393 consecutive error-free events are received. N392 defines the

number of errors required in a given event window, while N393 defines the number of polling events in each

window.

For example:

If N392=3 and N393=4, then if three errors occur within any four events, the interface is determined inactive.

Usage Examples

The following example sets the N392 threshold for 5 errors:

(config)#

interface frame-relay 1

(config-fr 1)#

frame-relay lmi-n392dte 5

1 2 ... 399 400 401 402 403 404 405 406 407 408 409 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 404

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing