ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 361)

100

101

Command Reference Guide Serial Interface Configuration Command Set

et-clock-source <source>

Use the et-clock-source command to configure the clock source used when creating the external transmit

(reference clock). Use the no form of this command to return to the default value.

Syntax Description

Specifies the signal source to use when creating the External Transmit reference

clock (et-clock).

rxclock

Use the clock recovered from the receive signal to generate et-clock.

txclock

Use the clock recovered from the transmit signal to generate et-clock.

Default Values

<source> txclock

Command Modes

(config-ser 1/1)# Serial Interface Configuration Mode

Command History

Release 1.1 Command was introduced

Functional Notes

External Transmit clock (et-clock) is an interface timing signal (provided by the DTE device) used to

synchronize the transfer of transmit data.

Usage Examples

The following example configures the serial interface to recover the clock signal from the received signal and

use it to generate et-clock:

(config)#

interface serial 1/1

(config-ser 1/1)#

et-clock-source rxclock

1 2 ... 356 357 358 359 360 361 362 363 364 365 366 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 361

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing