ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 465)

100

101

Command Reference Guide PPP Interface Configuration Command Set

bandwidth <value>

Use the bandwidth command to provide the bandwidth value of an interface to the higher-level protocols.

This value is used in cost calculations. Use the no form of this command to restore the default values.

Syntax Description

<value>

Enter bandwidth in kbps.

Default Values

To view default values, use the show interfaces command.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), Frame Relay Virtual Sub-interfaces

(fr 1.20), virtual PPP (ppp 1), and loopback interfaces

Command History

Release 3.1 Command was introduced

Functional Notes

The

bandwidth

command is an informational value that is communicated to the higher-level protocols to be

used in cost calculations. This is a routing parameter only and does not affect the physical interface.

Usage Examples

The following example sets bandwidth of the PPP interface to 10 Mbps:

(config)#

interface ppp 1

(config-ppp 1)#

bandwidth 10000

1 2 ... 460 461 462 463 464 465 466 467 468 469 470 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 465

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing