ADTRAN Stub Routing Dokumentacja Pobierz pdf (Strona 235)

100

101

Command Reference Guide Global Configuration Mode Command Set

snmp-server host <address> traps version <version> <community>

Use the snmp-server host traps version command to specify traps sent to an identified host. Use multiple

snmp-server host traps version commands to specify all desired hosts. Use the no form of this command

to return to the default value.

Syntax Description

Specifies the IP address of the SNMP host that receives the traps.

Specifies the SNMP version as one of the following:

1 - SNMPv1

2C - SNMPv2C

Specifies the community string (used as a password) for authorized agents to

obtain access to SNMP information.

*Optional

Specifies the type of notification trap to enable. Leaving this option blank

enables ALL system traps.

snmp

Enables a subset of traps specified in RFC 1157.

The following traps are supported:

coldStart

warmStart

linkUp

linkDown

authenticationFailure

Default Values

By default, there are no hosts or traps enabled.

Command Modes

(config)# Global Configuration Mode required

Command History

Release 1.1 Command was introduced

Usage Examples

The following example sends all SNMP traps to the host at address

190.3.44.69

and community string

Community

using SNMPv2C:

(config)#

snmp-server host 190.3.44.69 traps version 2c My Community snmp

1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag

ADTRAN Stub Routing Dokumentacja Strona 235

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADTRAN Stub Routing