ADTRAN Tracer TRACER 2 x E1 Podręcznik Użytkownika Strona 123

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 122
Ethernet BERT Test
Multi Protocol Test Set 111
Global Configuration
³ Invert: Enable or disable Invert. If enabled, the test pattern is
transmitted/analyzed with all bits inverted meaning that every 0 is
changed to 1, and every 1 to 0. For example, the pattern 1100 will be
sent as 0011. The test pattern inversion is disabled by default.
³ Duration: Set the duration of the test. The choices are as follows:
³ 15-Min
³ 1-Hour
³ 2-Hours
³ 4-Hours
³ 6-Hours
³ 12-Hours
³ 24-Hours
³ User Defined
³ Disabled: Runs the test for infinite time. It can be stopped
manually at any point of time.
The default value is Disabled. Select the duration field next to User
Defined and a pop up menu will be displayed to configure the test
duration.
³ No Traffic Time: The No Traffic Time configuration allows a user to set
the time between two Ethernet Frames that is acceptable without
raising an alarm. It also describes when a Service Disruption event
occurs. Enter the acceptable delay between the two frames. The
acceptable range is from 0.01 ms to 1000 ms. The default value is
1000 ms.
Przeglądanie stron 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 318 319

Komentarze do niniejszej Instrukcji

Brak uwag