ADTRAN 4202023L2 Instrukcja Użytkownika Pobierz pdf (Strona 19)

Chapter 1 Introduction

1. ABOUT THIS MANUAL

This manual provides the information needed for the installation and operation of the Smart 16e Shelf

(shown in Figure 1 on page 20). Operation instructions for the data communication devices used with the

shelf are provided in the manuals furnished with those products.

2. PRODUCT OVERVIEW

The ADTRAN Smart 16e Shelf provides convenient mounting for up to 16 data communications devices

for large host-type applications. The shelf can be mounted in either 19” or 23” racks and cabinets by using

a set of brackets mounted alongside the shelf.

The Smart 16e Shelf has an intelligent controller card designed to configure and control all devices in the

local shelf. SNMP management is available for all Smart 16e devices via the embedded SNMP agent.

There are five choices of input devices for the controller card:

• A VT100 compatible terminal which can be connected to the EIA-232 (DB-9) interface located on the

rear panel of the controller card. For remote applications, a modem can be used.

• The optional DATAMATE, a hand-held keypad with a 2 x 16 LCD display. This unit plugs into the

RJ-11 jack on the front of the controller card.

• A device running SLIP protocol. A SLIP interface (the EIA-232, DB-9 interface) is located on the rear

panel of the controller card. For remote applications, a modem can be used.

• A device running async PPP protocol. An async PPP interface (the EIA-232, DB-9 interface) is located

on the rear panel of the controller card. For remote applications, a modem can be used.

• A LAN running Ethernet protocol. An Ethernet 10/100BaseT interface is located on the rear panel of

the controller card.

The shelf and all installed units are internally powered by an AC or DC supply. An optional second power

supply can be used for backup protection.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Brak uwag

ADTRAN 4202023L2 Instrukcja Użytkownika Strona 19