ADTRAN Quad T1 IMA Przewodnik Instalacji Pobierz pdf (Strona 19)

NetVanta 6310/6330 Series Hardware Installation Guide Physical Description

10/100Base-T Ethernet Interfaces

The Ethernet ports (ETH 0/1 and ETH 0/2) are RJ-45 connectors. See Table A-2 on page 43 for the

Ethernet interface pinouts. The Ethernet ports provide the following:

• 10Base-T or 100Base-T with a single connector

• Auto negotiation

• CSMA/CD

• IEEE 802.3 compatibility

CONSOLE Interface

The CONSOLE interface is an EIA-232 serial port (DCE), which provides for local management and

configuration (via a DB-9 female connector). See Table A-1 on page 43 for the

CONSOLE interface

pinouts.

Power Connection

The rear panel has a power input to the AC universal power supply. Please refer to Supplying Power to

the Unit on page 40 for connection details.

NetVanta 6310/6330 Series Front Panel LEDs

Table 1 describes the front panel LEDs.

Connection directly to an external modem requires a cross-over cable.

Table 1. NetVanta 6310/6330 Series Front Panel LEDs

LED Color Indication

STATUS

Off Unit is not receiving power.

Green (flashing) On power up, the STATUS LED flashes rapidly for five

seconds, during which time the user may escape to boot

mode from the CONSOLE port.

Green (solid) Power is on and unit is functioning normally.

Red (solid) Power is on, but the self-test failed.

PRI (6310)

Off Interface is administratively disabled.

Green (solid) Interface is enabled and has a connection.

Amber (solid) Interface is in test mode.

Red (solid) An alarm condition is occurring on the interface.

FXO/FXS (6330 Series)

Off All ports are inactive or administratively disabled.

Green (solid) At least one port is off-hook.

Green (flashing) At least one port is ringing.

Amber (solid) Port is in test mode.

Red (solid) Fault condition is occurring on the interface.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 45 46

Brak uwag

ADTRAN Quad T1 IMA Przewodnik Instalacji Strona 19